Hewlett Packard Enterprise ProCurve 2510-48. Switch type: Managed, Switch layer: L2. Basic switching RJ-45 Ethernet ports type: Fast Ethernet (10/100), Basic switching RJ-45 Ethernet ports quantity: 48, Console port: RJ-45. Full duplex. MAC address table: 8000 entries, Switching capacity: 17.6 Gbit/s. Networking standards: IEEE 802.1p,IEEE 802.1Q,IEEE 802.1s,IEEE 802.3,IEEE 802.3ab,IEEE 802.3ad,IEEE 802.3u,IEEE 802.3x. Rack mounting, Form factor: 1U

Designed to provide essential solutions to small and medium businesses, the HP 2510 Switch Series consists of four Layer 2-managed switches that provide reliable 10/100 and 10/100/1000 connectivity. Building off of the popularity of the HP 2510-24 Switch, a 24-port 10/100 switch with two dual-personality ports, the 2510 switch series has expanded to include a higher-density HP 2510-48 Switch, with 48 10/100 ports and four Gigabit Ethernet uplinks. Additionally, the 2510-G switches add Gigabit Ethernet to the 2510 series, with the 2510G-24 and 2510G-48 switches, which are 24- and 48-port 10/100/1000 switches, each with four dual-personality ports, making them ideal for businesses that are ready to upgrade to increased network performance.

Quality of Service (QoS)

• IEEE 802.1p prioritization: delivers data to devices based on the priority and type of traffic


Connectivity

• 10/100 and 10/100/1000 connectivity: provides customers with the choice of selecting the network connectivity speed that best meets their needs, with a consistent user experience


Resiliency and high availability

• IEEE 802.1s Multiple Spanning Tree: provides high link availability in multiple VLAN environments by allowing multiple spanning trees; provides legacy support for IEEE 802.1d and IEEE 802.1w


Manageability

• IEEE 802.1AB Link Layer Discovery Protocol (LLDP): provides automated device discovery protocol for easy mapping by network management applications


Layer 2 switching

• VLAN support and tagging: support up to 64 port-based VLANs and dynamic configuration of IEEE 802.1Q VLAN tagging, providing security between workgroups


Security

• Protected ports: provides increased security by allowing specified ports to be isolated from all other ports on the switch; the protected port or ports can communicate only with the uplinks or shared resources


Convergence

• IP multicast snooping: automatically prevents flooding of IP multicast traffic

Rack mounting	Yes
Stackable	Yes
Form factor	1U
Colour of product	Black
Safety	cUL (CSA 22.2 No. 60950); UL 60950-1; IEC 60950; EN 60950
Electromagnetic compatibility	FCC Class A; VCCI Class A; EN 55022/CISPR 22 Class A; IEC/EN 61000-3-2; IEC/EN 61000-3-3
Switch type	Managed
Switch layer	L2
Quality of Service (QoS) support	Yes
Web-based management	Yes
MIB support	Yes
Basic switching RJ-45 Ethernet ports quantity	48
Basic switching RJ-45 Ethernet ports type	Fast Ethernet (10/100)
SFP module slots quantity	2
Console port	RJ-45
Networking standards	IEEE 802.1p,IEEE 802.1Q,IEEE 802.1s,IEEE 802.3,IEEE 802.3ab,IEEE 802.3ad,IEEE 802.3u,IEEE 802.3x
10G support	No
Full duplex	Yes
Auto MDI/MDI-X	Yes
Spanning tree protocol	Yes
Link aggregation	Yes
Auto-sensing	Yes
Flow control support	Yes
VLAN support	Yes
MAC address table	8000 entries
Supported data transfer rates	10/100/1000 Mbps
Switching capacity	17.6 Gbit/s
Throughput	13 Mpps
Latency (10-100 Mbps)	4.9 µs
Latency (1 Gbps)	2.9 µs
Packet buffer memory	0.5 MB
SSH/SSL support	Yes
Multicast support	Yes
Management protocols	SNMP 1, RMON, SNMP 3, SNMP 2c, HTTP
Built-in processor	Yes
Processor model	MIPS
Processor frequency	300 MHz
Memory type	SDRAM
Internal memory	128 MB
Flash memory	16 MB
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Input current	0.7 - 1.2 A
Power consumption (typical)	27 W
Power over Ethernet (PoE)	No
Heat dissipation	92 BTU/h
Width	442.5 mm
Depth	236.2 mm
Height	43.9 mm
Weight	2.74 kg
Weight (imperial)	2.74 kg (6.05 lbs)
Electromagnetic immunity	EN 55024, CISPR 24; IEC 61000-4-2; IEC 61000-4-3; IEC 61000-4-4; IEC 61000-4-5; IEC 61000-4-6; IEC 61000-4-8; IEC 61000-4-11; EN 61000-3-2, IEC 61000-3-2; EN 61000-3-3, IEC 61000-3-3
Connectivity technology	Wired
Authentication method	RADIUS, TACACS+

High quality for less.

Buying a refurbished product from Kimbrer Computer can provide significant savings of up to 80% off the original retail price of a brand-new model, which makes it a great way to cut costs without compromising quality. We back our quality commitment by including a STANDARD ONE-YEAR WARRANTY, with additional coverage options available. In short, with a refurbished product from Kimbrer Computer, you will get:

• • A high-quality product at a very cheap rate
• • A cost-effective and environmentally friendly alternative
• • Fast delivery, directly to you or your customer
• • Great value for money

 

Refurbished – what is it?

A refurbished product generally refers to a used and pre-owned item. Every refurbished product from Kimbrer Computer has been professionally inspected and restored to “Grade A” condition, with faulty parts replaced with genuine ones, to make sure everything works and looks perfectly before being repackaged and put back on the market for resale. Though refurbished models may show some signs of wear, we guarantee that the items are always:

• • Inspected, tested and professionally restored by certified technicians
• • Fully wiped of data and software, leaving no traces of data for recovery
• • Carefully wrapped and shipped in electrostatic discharge (ESD) materials
• • With all original accessories and components (if applicable)